PA Craft Beer – Homemade, Homegrown

This post was paid for with Pennsylvania Taxpayer Dollars and sponsored by the PA Department of Agriculture. However, all thoughts and opinions are my own. 

After a hard day’s work, what better feeling is there than cracking open a cold one on a warm sunny day? But as you enjoy the crisp carbonation of that bitter liquid, do you really know where your beer comes from? A fresh beer can be even more satisfying when it’s brewed and sourced locally! 

Here in Pennsylvania, we have over 500 craft breweries, second only to California. For beer to be considered “craft” it is typically made by an independent company using traditional ingredients on a small scale. When you visit a craft brewery, you’re having the freshest beer, made by hand in an onsite brewing facility. Sometimes you can even see the brewing equipment around the corner while sitting at the bar!

Fermentors right in the taproom at Stick City Brewing

But to understand where the beer is coming from, we need to back up and remember the basics. Beer is a combination of basic ingredients: water, barley, yeast, and hops. But what sounds simple can turn into a complex alchemy of sourcing ingredients to get a specific flavor profile. Hops are the ingredient that gives beer its quintessential bitter flavor. They typically need a mild, wet growing environment to thrive, which can be difficult to achieve outside of specific geographic regions; most hops grown in the US come from the Pacific Northwest for this reason. While hops are the flashy component, malt is the backbone of beer. Malt is a grain that has been partially sprouted, then dried. It’s used in a variety of foods and drinks, but it’s integral to beer because it provides the sugars that start the fermentation process, thereby putting the booze in your brews. The type of malt used also contributes to the final beer’s color and flavor. Finally, the fermentation process can’t happen without yeast. This microorganism loves to chomp up the sugars in malt and converts them to carbon dioxide and alcohol. Along with water, these three ingredients make up the beverage we know and love! 

With the scale of craft beer production in Pennsylvania, brewers need a lot of grain and hops. So, where do they get these products? Many source hops and malt from major distributors in the Pacific Northwest or internationally. However, a growing number are turning to our own booming agriculture industry here in the Keystone State. 

Pennsylvania has over 7.7 million acres of farmland, most of which are family-owned farms. These nearly 49,000 farms support a multi-billion-dollar industry that supplies jobs and food right here in our state. So it seems like a natural leap for small businesses to source supplies and ingredients from farms right in their backyard, right? PA-Preferred, a program of the PA Department of Agriculture, is a resource for finding locally made food and farm products in Pennsylvania! With this resource, both consumers and producers can easily find businesses to source ingredients from, whether it’s for hobbyist homebrewers or full-time production brewers.

For Nick Salkeld, brewer and owner of Stick City Brewing in Mars, PA, using local products is a no-brainer. “You can physically go out and see the product. You can immediately see and meet the person who grew it,” he said. “You can even see the dirt where it came from.” 

Sustainability is a huge part of Salkeld’s mission, and buying local is a key part of that. He often works with a malt supplier in Butler County, CNC Malts, for custom malt blends to get the exact flavor profile and coloring he’s aiming to achieve for his beer. All of the grains at CNC Malts are sourced locally and floor-malted right in Butler County. More than that, Salkeld has a personal connection to the company. The maltsters’ (which is what you call a person who makes malt) processing facility is the old Clearfield Schoolhouse where Salkeld’s dad went to school. It can’t get more local than that! 

A flight of house-made brews at Lincoln Avenue Brewery

Lincoln Avenue Brewery in Bellevue, PA (affectionately called LAB) also sources much of its malt from CNC Malts. The brewery also boasts a full kitchen, so it’s not just about sourcing local beer ingredients but the whole range of foods to stock their kitchen. A rotating menu based on seasonal fruits and veggies means that they can buy the bulk of their produce from Haffey Farms, a Bellevue Farmers Market staple. For Lisa Saylor, brewery co-owner, buying local just makes sense because it supports a regional sustainability circle. The spent grains from their house-made beer are given back to local farmers to feed their livestock. In turn, that livestock might eventually make its way to Tom Friday’s Market, a butcher shop where Lincoln Avenue sources the bulk of its meat. Talk about farm to plate! 

Working with local products and producers is a “more iterative process, rather than top down,” says Salkeld of Stick City. He can work directly with the folks at CNC Malts to create custom grain blends that give Stick City’s beer a unique flavor. But what about those pesky hops that prefer the Pacific Northwest?

It’s notoriously difficult to grow hops in the Pennsylvania climate; as the saying goes, “it’s a wet heat”!. But that’s not stopping some plucky PA farmers from giving it a shot! Especially when a survey from Penn State Extension school found that a majority of craft brewers in the state are inspired by sourcing locally. Stick City, for one, adds fresh hops grown in Western PA by Hazy Daze Farms to their late August beers (when hops are harvested) and also sources dried and pelletized PA-grown hops from CNC Malts. Through the PA Preferred online database, any brewers interested in local hops and grains can find PA farmers growing them.

PA’s brewery culture is booming, and it can only get stronger with more emphasis on sourcing local ingredients. Through the PA Preferred Program, brewers can easily find local farmers to partner with and strive toward beers that are homemade and homegrown, with a taste of Pennsylvania in every sip!

Want to learn more about the PA Preferred Program and how you can support local farmers? Check out www.papreferred.com or follow them on Instagram for announcements of new members to the program. 

Earth-Friendly Tips: Hiking Edition

Looking to do your part this Earth Day? Here are some sustainability tips to make your next adventure more eco-friendly. Remember: you don’t have to make big changes to have an impact! Try adopting one or two of these suggestions on your next hike and see how it goes!

  1. Pack Out Trash – Make sure to always pack out your trash, including pet waste, compostables, and food wrappers, especially in areas where trash cans might not get emptied very often. I like to carry a trash bag in my hiking bag to also pick up any trash I see along the trail.

  1. Carpool to Trailhead – If hiking with a group, try to reduce fuel use by carpooling to the trailhead. Bonus, you won’t take up as much space in the parking lot and be less likely to park outside of designated areas

  1. Be a hiking steward – Recreate responsibly! Only park in designated areas and stay on marked trails. Don’t pick wildflowers and let animals be wild. Remember to always Leave No Trace!

  1. Educate Others – When hiking with new (and sometimes even experienced hikers) help them to understand how to be more sustainable hikers and gently remind others of the principles of leave no trace.

  1. Avoid single-use plastics – Whenever possible, try to avoid using wrappers or baggies that you immediately throw away. Opt for reusable sealable bags for snacks, bring water in a metal bottle or hydration pack, and dry bags for keeping electronics and gear dry. Or even just make sure to keep reusing a ziploc baggie!

  1. Repair Gear or Shop Secondhand – As much as we love new gear, sometimes all we need is to repair a tear or get a new zipper. Or if you really need to replace something, try to get it secondhand or check your local Buy Nothing groups. And make sure to donate or recycle old gear!

  1. Shop Local – Another gear one, always shop local for all your hiking needs! Not only does this support the local economy, but you can also have a better sense of where your products are coming from and choose to support businesses that invest in sustainable practices. Plus, it cuts back on shipping materials!

Let’s work together to preserve this beautiful planet for generations to come! Each person can do something small to make a difference this Earth Day!

Nature Nugget – July 28

If a tree falls in the forest…should it stay there?

We’ve all seen fallen trees in the woods. Whether it’s from a bad storm or just the end of a tree’s life, eventually a tree will die. If you’re like me, you’ve noticed that in some state parks and forests, when a tree falls it’s just left there. Coming from a world of manicured lawns where anything unsightly is removed, this always felt wrong to me. Shouldn’t they remove the log? Can’t it be used for something?

In today’s Nature Nugget, I want to talk about how dead and decaying trees actually form an important part of a forest’s ecosystem. Although the tree has died, its part in the story is just beginning! But first some terminology: a dead tree that has fallen is a log. A dead tree that is still standing is a snag.

Fallen tree that was cut to remove from trail

What do dead and decaying trees provide?

  • Roosting spot for birds such as woodpeckers
  • Main home for bugs like ants, beetles, wasps and bees. Dead logs are also prime homes for larger critters like salamanders, frogs, and even snakes. Some scientists estimate that dead wood provides food and homes for more than 40% of forest wildlife species!
  • Form the bottom of the food chain for detritivores (organisms that feed on dead material) like fungi and bacteria which are then consumed by other animals
Fungi growing on decomposed log
  • Prevents erosion by reducing stormwater runoff. Logs in running water also prevent bank erosion, as well as trap sediment so that it doesn’t flow any further along.
  • Replenishes nutrients in the soil. Research has shown that trees are the main source of organic material in soil!
  • Plays an important role in forest regeneration. Not only does a fallen tree open up the canopy and make room for new trees, they also can become an extremely fertile growing medium for seeds and seedlings that have gathered there.
  • In ponds and streams, downed trees serve as sunning spots for turtles, fishing perches for birds, and even nests for fish.
Turtles sunbathing on a log

I think it’s pretty clear that dead tree are essential to the forest ecosystem! Now some people might be wondering about dead hazards and that’s a good point! Dead trees, especially snags can be seen as a fire hazard. And with wildfires constantly in the news, it’s definitely something to be concerned about! But remember, some wildfires are natural and can even be good for the ecosystem. There are certain species of plant that even need fire in order to germinate! However, if you have a dead tree on your property, you should get it removed. Dead wood is still a fire hazard and also a falling hazard especially near homes and people. Leave the dead wood to the forest!

Dead and decaying trees form an important part of a forest’s ecosystem. That’s why they are often left on the forest floor in parks. It doesn’t mean that the park isn’t well taken care – quite the opposite actually! Next time you pass a decaying tree, just think of all the life that could be starting a new inside of it.

Sources:

https://www.thewildlifenews.com/2018/12/20/the-ecological-value-of-dead-trees/
https://www.fs.fed.us/pnw/sciencef/scifi20.pdf
https://www.americanforests.org/blog/nurse-logs-healers-forest/
https://www.nnrg.org/habitat-piles/
https://woodlandfishandwildlife.com/wp-content/uploads/2019/12/Family-Forests-and-Wildlife_What-you-Need-to-Know_reduced.pdf
https://dnr.maryland.gov/streams/Publications/WoodyDebrisForWeb.pdf